How to Install Your Own Kitchen – Part 6 – Installing Kitchen Appliances

Installing Kitchen Appliances

Appliances
If installing a kitchen was like building a car then it’s time to fit the engine, in this case the appliances. Kitchens, like cars, depend upon the quality of the appliances to give a more efficient performance. There is a wide range of appliances now available and they can range from Reliant Robin to Rolls Royce in their comparative looks and performance. The current trend is for aluminum or stainless steel finishes and due to their popularity they are more expensive.

Some appliances are fitter friendly, others not. Some manufacturers offer a good service back up if things go wrong, others don’t and some may last for years others, months. After 23 years of installing appliances, I have formed an experienced opinion on what’s hot and what’s not in the kitchen. Anyone wishing to hear of my views before buying a particular make can register and post a query in our forum and I will offer an honest opinion on your choice.

Anyway, every car needs a parking space so in this article I’ll attempt to show you how to install your appliances with the minimum of fuss.

Tools required:
Spirit level
Hand tools. Screwdrivers both pozidrive and slotted heads of varying sizes, pliers and grips.
Cordless drill/driver Masonry, screwdriver, and steel drill bits of various widths.
Plumbing tools.
Patience, understanding and the ability to deflect criticism successfully.
Freestanding Washing Machines/Dishwashers.
The majority of washing machines are 595mm wide and the important thing to remember is that freestanding machines are normally between 840mm and 860mm high. Important because when installing your kitchen units at the standard height of 870mm, this can leave very little tolerance for fitting when flooring has been added. A 600mm, or 450mm, in the case of slim-line dishwashers, space is sufficient and will ensure a more fully fitted look.

For correct fitting of a washing machine, all plumbing services should be fitted in an adjacent cupboard to prevent the machine protruding from the worktop. A washing machine waste of 40mm diameter can be fitted within the void of an adjacent cupboard and again this will prevent the machine protruding from the worktop.

If fitted next to a sink unit, the waste from the appliance may be incorporated with that of the sink. However should the washing machine and dishwasher be sited either side of the sink, I recommend that you install a separate waste pipe. Three appliances entering one waste pipe will render the waste extremely prone to blockages.

Electrical services should also be fitted in an adjoining unit and appropriate sized holes for hoses and plugs must be drilled through the back or base of the cupboard. This can be achieved with an appropriately sized hole saw.

Flooring for all freestanding appliances should be installed prior to final fitting. After completing the above, slide the washing machine into place and make necessary adjustments to the feet for leveling purposes.

Built under freestanding fridges/freezers.
Installation of built under fridges/freezers is carried out much the same as above yet they vary in widths. Adding 5mm to the width of the appliance will leave sufficient space for fitting.

Freestanding machines may be fully integrated by the use of a deeper worktop and by increasing the width of the space and doors that will house them.
Before explaining the installation of cookers and hobs, I must stress that to work on any gas appliance, a person must be competent to do so.

Built in Ovens/Microwaves.
Whether the oven is a single or double oven ensure the cabinet aperture is the correct size for the appliance as heights can vary. Check the electrical rating of the appliance and fit the appropriate sized outlet, again avoiding the space directly behind the appliance. Once you’ve fed the appliance flex to the outlet, this may be in adjacent cupboard or in the case of a double oven, in the cupboard above, slide in the appliance and screw to the cabinet gables with the screws provided.

Splash back
It may be that you wish to install a splash back with your range cooker and to fit one correctly you must determine the finished height of your worktop. The reason for this being, that your extractor should be fitted prior to fitting the cooker and splash back fixings are positioned behind the position of the extractor. Installing this before fitting the cooker will prevent any damage to the appliance and ensure that you have adequate space to work.

Range cookers
Preparation for the fitting of Range Cookers is similar to that of a freestanding appliance in that the space between cupboards needs to be accurate and I would suggest, 5mm wider than the appliance. The electrical connection, as with all appliances, should be made through an adjacent cupboard for access purposes.

Great importance should be given to the finished height of the appliance and the top edge of the cooker should finish at least 5mm above the worktop. Although not regulatory, I protect adjacent worktop edges with metal edging strips and these are available at major DIY outlets.
Should the appliance legs offer insufficient height adjustment, the appliance must be raised on a platform. This platform can then be finished in a material of your choice to match the appliance or the kitchen.

Integrated Dishwasher/Washing Machine
Integrated Dishwashers are available in slim line, generally 450mm width, and standard, 600mm wide sizes. The size of the dishwasher matches the aperture you will need to leave to accommodate the appliance, no more, no less. The only room for accommodating crossing pipe work or services behind integrated dishwashers is within the recess at the bottom of the machine. This is an important point to remember as to install services elsewhere behind the appliance will result in the dishwasher protruding from the adjacent cabinets and unless you wish to start a new design trend, this is to be avoided.

Doors are fitted to the appliance door by means of fixings provided with each machine a template assists in marking the appropriate points. The nature of the way a dishwasher door opens, warrants that the kitchen kickboard be cut approximately 10mm directly beneath the appliance in order to accommodate the door on opening.

Again, water and electrical services for both dishwashers and washing machines should terminate in an adjacent cupboard and waste services must be fitted behind an adjacent unit, within the void. Should the appliance be sited next to a sink however, the waste can be integrated with the sinks waste outlet.

When positioning the appliance in readiness to connect, feed the water hoses and electrical flex behind the appropriate rear unit leg. This will allow access to the services when the appliance is in place and will also permit fitting before the furniture plinth is installed.

The height of the appliance is made by means of adjustable feet and the rear feet can be accessed under the unit prior to fitting the plinth. Once you’ve achieved the correct level, screw to the underside of the worktop with the screws provided. Dishwashers require the fitting of a protective waterproof barrier and this should be fitted to the underside of the worktop once the appliance is in place.

Many integrated washing machines present a further problem for installers as they have no recess at the rear of the machine and the height adjustment is minimal. For this reason it may be necessary to install a platform ensuring that it does not protrude from the furniture plinth and no services should cross the rear wall behind the appliance as they will impede on the appliance hoses, thereby obstructing correct fitting.

Of all integrated appliances, integrated washing machines in my opinion are the least fitter friendly and require many improvements before they become so. The door is fitted to the appliance by means of side opening hinges that allow little adjustment and you may be required to drill the furniture door hinges to match adjacent door heights. There is little room for error and measurements should be double checked before drilling.

Built Under Integrated Fridges/Freezers
Follow the same rules as for installing a dishwasher. Again there is no room for services directly behind unless at low level. Feet are fully height adjustable and fridges or freezers are screwed to the worktop through pre-drilled holes once fitted. For door fitting, follow the instructions supplied with the appliance. These again, will come with a template and fixings. More manufacturers allow rear leg adjustment from the front of the appliance and this makes for simpler installation.

Built In Integrated Fridges/Freezers
Integrated built in appliances, unlike built-under appliances, are fitted within a furniture housing. Some manufacturers require the doors of the housing to be fitted to the cabinet prior to fitting the appliance but of recent; more rely on fitting the doors direct to the appliance after fitting.

Templates and fixings are provided with the appliance and provision is made for fixing through the feet and the top of the appliance once leveling is complete. Ensure that the appliance is fitted to the correct depth for correct operation of both the cabinet and appliance doors.

Again it is a good rule to avoid services to the rear of the appliance. It may be necessary to adapt the cabinet prior to fitting your built in appliance as some cabinet manufacturers leave a back fitted to the appliance aperture. This will need to be removed to allow correct fitting of the appliance.

Appliances fitted within a housing require adequate ventilation and this is achieved by fitting a ventilator to the plinth.
American Freestanding Fridge Freezers
These appliances are becoming increasingly popular and require a cold water supply. They can be integrated to blend in with your kitchen by installing a top cupboard between two tall end panels. As with other appliances, services i.e. water and electrical, should terminate and be connected to the appliance via an adjacent cupboard. Should this not be possible, fit the services as close as possible to the rear wall. If you wish your fridge to lie flush with the adjacent cabinets you will require greater depth matching end panels and this will achieve the desired effect.

Built In Microwaves

Posted in Uncategorized | Comments Off on How to Install Your Own Kitchen – Part 6 – Installing Kitchen Appliances

Old Appliance Parts

Nowadays, newer and better models of various types of appliances come out in the market every few months. As a result, consumers are “bombarded” with a wide selection of choices regarding appliance options. These include different models of dishwashers, ovens, refrigerators, and televisions. However, the high turnover rate of appliance models does not only mean that there is a wide selection of appliance options in the market. This is because it also means that people who own “older” appliance models will find it hard to look for appliance parts that they need to for their appliances, especially in stores.

As appliances age, the more they are considered “obsolete.” This results to stores opting to fill their stockrooms with newer appliance parts. But this does not mean that people should rush to stores to buy new appliances because they are having a hard time finding replacement parts for their appliances. There are still good sources of older appliance parts on the market.

Online Surplus Stores

As with “obsolete” appliance parts, the Internet also serves as a rich source of older appliance parts. However, apart from the usual web sites that sell old appliance parts, there are other web sites that you can visit to buy older appliance parts in “mint” condition. These web sites are the web sites of surplus stores that have large inventories of old appliance parts that they got direct from the manufacturers. Apart from being a good source of old appliance parts, buying from these web sites can also ensure that you get access to high quality appliance parts.

One good example of such a web site is http://www.liquidityservicesinc.com, which has a wide network of sellers and buyers of surplus items, including appliance parts. In addition to this, other web sites that sell surplus appliance parts also provide other services, which include shipping and delivery services, very helpful for individuals and businesses.

The Internet serves as a very good source of old appliance parts, which consumers can access. However, old appliance parts are not only available from online retail stores because there are other good sources of old appliance parts online. One of these is online surplus stores that sell appliance parts that they got directly from the manufacturers. Therefore, buying from them to get high quality appliance parts is one of the better options for your appliance parts needs.

Posted in Uncategorized | Comments Off on Old Appliance Parts